Dell Latitude E6320 (Early 2011) - Manual (Page 51)

Installing The LED Board
1. Align the LED board on the palmrest.
2. Replace and tighten the screw that secure the LED board to the palmrest.
3. Route the LED board cable to its original position.
4. Install the
palmrest assembly .
5. Install the keyboard .
6. Install the keyboard trim .
7. Install the hard drive .
8. Install the ExpressCard .
9. Install the base cover .
10. Install the optical drive .
11. Install the Secure Digital (SD) card .
12. Install the battery .
13. Follow the procedures in After Working Inside Your Computer .
51