Dell Latitude E6320 (Early 2011) - Manual (Page 73)

NOTE: Steps 1 and 2 are applicable for computers that shipped in the United States
of America.
2. Replace and tighten the screw to secure the TAA board to the computer.
3. Align the system board into its original position on the computer.
4. Connect the power supply cable.
5. Replace and tighten the screws to secure the system board to the
computer.
6. Route and connect the smart card and speaker cables to the system board.
7. Install the
display assembly .
8. Install the display hinge covers .
9. Install the palmrest assembly .
10. Install the keyboard .
11. Install the keyboard trim .
12. Install the hard drive .
13. Install the ExpressCard .
14. Install the base cover .
15. Install the optical drive .
16. Install the Secure Digital (SD) card .
17. Install the battery .
18. Follow the procedures in After Working Inside Your Computer .
73