Installing the display panel – Dell Latitude E6320 (Early 2011) User Manual
Page 94
Advertising
6. Disconnect the Low-Voltage Differential Signaling (LVDS) cable from the
display panel.
7. Remove the display panel from the display assembly.
Installing The Display Panel
1. Align the display panel in its original position on the display assembly.
2. Connect the Low-Voltage Differential Signaling (LVDS) cable to the display
panel.
3. Tighten the screws to secure the display panel to the display assembly.
4. Install the
5. Install the
After Working Inside Your Computer
94
Advertising