Dell Latitude E6320 (Early 2011) - Manual (Page 77)

Installing The Heat-Sink Assembly
1. Align the heat-sink assembly to its original position on the system board.
2. Tighten the screws to secure the heat-sink assembly to the system board.
3. Connect the heat-sink cable to the system board.
4. Install the
heat-sink assembly .
5. Install the display assembly .
6. Install the display hinge covers .
7. Install the palmrest assembly .
8. Install the keyboard .
9. Install the keyboard trim .
10. Install the hard drive .
11. Install the ExpressCard .
12. Install the base cover .
13. Install the optical drive .
14. Install the Secure Digital (SD) card .
15. Install the battery .
16. Follow the procedures in After Working Inside Your Computer .
77