Replacing the display assembly – Dell Alienware M11x (Early 2010) User Manual
Page 13
12.
Gently slide the antenna cables out through the slot on the computer base.
13.
Lift the display assembly off the computer.
Replacing the Display Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Slide the antenna cables in through the slot on the computer base.
3.
Place the display assembly in position and replace the four screws that secure the display assembly to the computer base.
4.
Connect the display cable to the connector on the system board.
5.
Turn the computer over and route the Mini-Card antenna cables through the routing guides on the computer base.
6.
Connect the antenna cables to the Mini-Card(s).
7.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the hinge cover (see
Replacing the Hinge Cover
).
10.
Replace the battery pack (see
Replacing the Battery Pack
).
11.
Replace the base cover (see
Replacing the Base Cover
).
1
display cable connector
2
screws (4)
1
antenna cables
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.