Entering the service tag in the bios – Dell Alienware M11x (Early 2010) User Manual
Page 38
Advertising
19.
Enter the service tag (see
Entering the Service Tag in the BIOS
Entering the Service Tag in the BIOS
1.
Ensure that the AC adapter is plugged in and that the main battery is installed properly.
2.
Turn on the computer.
3.
Press <F2> during POST to enter the system setup program.
4.
Navigate to the security tab and enter the service tag in the Set Service Tag field.
Back to Contents Page
NOTE:
After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.
Advertising