Speakers, Removing the speakers, Replacing the speakers – Dell Alienware M11x (Early 2010) User Manual
Page 35
Back to Contents Page
Speakers
Alienware® M11x Service Manual
Removing the Speakers
1.
Follow the instructions in
Before You Begin
.
2.
Remove the system board (see
Removing the System Board
).
3.
Remove the three screws that secure the speakers to the computer base.
4.
Note the routing of the speaker cable and remove the speakers and cable from the computer base.
Replacing the Speakers
1.
Follow the instructions in
Before You Begin
.
2.
Place the speakers on the computer base and route the speaker cables in the routing guides.
3.
Replace the three screws that secure the speakers to the computer base.
4.
Replace the system board (see
Replacing the System Board
).
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery Pack
) before working inside the
computer.
1
speakers (2)
2
screws (3)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.