Dell Proximity Printing Solution - Manual (Page 24)

DPPS – Installation Guide 24
Joining the Server to Active Directory/Domain
To join the server to the Active Directory ® or to the domain:
1 Type the following command in a terminal window:
sudo net ads join -s /etc/dpps/smb.conf -U ####
where #### is the name of a domain controller account.
If you get a message DNS update failed!, ignore it.
2 Type the root account password.
3 Type the domain controller's account password, if prompted.
4 Type the following command in a terminal window:
sudo net ads keytab add HTTP -s /etc/dpps/smb.conf
-U ####
where #### is the login name of a domain administrator.
5 Type the domain controller account password.
6 Type the following command in a terminal window:
sudo /etc/dpps/kerberos-setup.sh
This command overwrites the default system Kerberos file with DPPS's
customized file.
7 Restart Ubuntu.
Testing the Server
To test the server, perform the following steps:
1 Install the DPPS client on a computer that is capable of detecting the
network you joined the DPPS server to.
2 Start the DPPS client on the computer are using to test
3 Type the FDQN when prompted to enter the DPPS server address.
The computer now connects to the DPPS server and you can proceed with
setting up maps and printers. For more information on setting up maps
and printers, see the DPPS Administrator’s Guide.