Dell Proximity Printing Solution - Manual (Page 32)

DPPS – Installation Guide 32
4
Installing SUSE Linux Enterprise
Server
Server Installation Requirements
The Dell Proximity Printing Solution (DPPS) server requires the following:
• A hardware or virtual server where you can install SUSE Linux Enterprise
Server (SLES) version 11–x64.
• At least 2 GB of RAM.
• At least a 2 GHz dual-core processor.
• RAID-5 storage setup.
NOTE: The hardware requirements may be higher if you have a large setup; for
example 100+ buildings or 1000+ printers.
You must have the following information:
• The workgroup/domain name used in your network environment.
• The Realm used in your network environment.
• The domain name you want to use for the system that will be hosting
the server.
• The Fully Qualified Domain Name (FQDN) for the server you wish to
set up.
• The username and the password to modify the domain controller settings.
• The SMTP mail server gateway (optional).
• Address of the domain controller/KDC.
• An static IP address for the DPPS server.
NOTE: For more information on workgroup, domain, Realm, DNS, SMTP,
routing, etc., contact your network administrator.