Dell Proximity Printing Solution - Manual (Page 38)

DPPS – Installation Guide 38
• Click Run in Terminal.
• Type the following commands in the terminal:
tar xvf filename.tar
cd directory : ./install.sh
c Log in as root and execute install shell, if you have not already.
• Verify the FQDN and press y if correct.
NOTE: In case of errors, contact Dell Pro Support.
If prompted to download additional packages, press y to accept. You
need to mount the SLES install disc/iso again, if it is still not
mounted. Repeat this process until it stops asking for more packages.
• Type the Realm that the server connects to.
• Type the IP or workgroup.
• Overwrite
/etc/krb5.conf. Press y if prompted.
• Join domain. Press y if prompted.
• Type the username and password for a user account that has
administrative rights/permissions.
• Type the password to obtain the keytab for the HTTP service.
• Add the SSLCert.
• Overwrite the Apache configuration files.
• Initialize the DPPS.
NOTE: Unless already configured prior to the installation, your password will
not be set, so press <Enter>.
The DPPS Packages are now installed.
Set up your initial server administrators list
a Pressing <Alt><F2> to open the Run window.
b Enter the command gedit /etc/group and press <Enter>.
NOTE: Since you logged in as root, you do not need to provide
administrator privileges.