Removing the computer base, Prerequisites, Procedure – Dell Inspiron 23 (2350, Mid 2013) User Manual
Page 18
18
| Removing
the
Computer
Base
Removing the Computer Base
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Remove the base cover. See "Removing the Base Cover" on page 15.
Procedure
1
Disconnect the antenna cables from the wireless mini-card.
2
Using the pull-tabs, disconnect the display cables from the system board.
1
wireless mini-card
2
antenna cables (2)
3
pull-tabs (2)
4
display cables (2)
1
2
4
3
book.book Page 18 Thursday, August 1, 2013 1:03 PM