Dell Inspiron 23 (2350, Mid 2013) - Manual (Page 36)

36 | Replacing the Wireless Mini-Card
Replacing the Wireless Mini-Card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
CAUTION: To avoid damage to the wireless mini-card, do not place any cables
under it.
1 Align the notch on the wireless mini-card with the tab on the mini-card connector.
2 Slide the wireless mini-card at an angle into the system-board connector.
3 Press the other end of the wireless mini-card down and replace the screws that
secure the wireless mini-card to the system board.
4 Connect the antenna cables to the wireless mini-card.
The following table provides the antenna-cable color scheme for the wireless
mini-card supported by your computer.
Postrequisites
1 Replace the computer base. See "Replacing the Computer Base" on page 20.
2 Replace the base cover. See "Replacing the Base Cover" on page 17.
Connectors on the wireless card Antenna-cable color
Main (white triangle)
Auxiliary (black triangle)
White
Black
book.book Page 36 Thursday, August 1, 2013 1:03 PM