Dell Inspiron 23 (2350, Mid 2013) - Manual (Page 45)

Removing the Converter Board | 45
Removing the Converter Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 15.
2 Remove the computer base. See "Removing the Computer Base" on page 18.
3 Remove the back cover. See "Removing the Back Cover" on page 43.
Procedure
1 Disconnect the converter-board cables from the converter board.
2 Remove the screws that secure the converter board to the display bracket.
3 Lift the converter board away off the display assembly.
1 screws (2) 2 converter-board cables (2)
3 converter board
2
1
3
book.book Page 45 Thursday, August 1, 2013 1:03 PM