Dell PowerVault 124T User Manual

Page 52

Advertising
background image

Troubleshooting: Dell PowerVault 124T DLT VS160 Autoloader User's Guide

file:///T|/htdocs/stor-sys/124T/en/124tvs16/trouble.htm[12/5/2012 10:26:08 AM]

39

ALD (Autoloader

Diagnostic) Limits Error

This error may occur as a result of a failed diagnostic test.

If the Magazine Test or Inventory Test failed, remove and inspect the

magazines

one at a time. Turn the white thumbwheels on each magazine and insure

that the carriers move freely at

least one full rotation in each direction. Re-insert each magazine after

inspection.

If the Picker Test failed, verify there is no obstruction within the picker

assembly and repeat the test.

If the Random Moves test failed, see steps above for necessary actions.

Power cycle the autoloader and re-run the failed test. Contact

support.dell.com

if failure recurs.

Tape Drive Error Types

3A

Drive Reset Error

Check the TapeAlert log for more specific drive error information. Refer to

Table 3

for recommended actions.

3B

Drive HW Error

3C

Drive Cleaning Required

Perform cleaning by loading a valid cleaning cartridge into the drive. If a

slot is available to be dedicated for a cleaning cartridge, this operation can

be enabled to run automatically within the Remote Management Unit

Configuration page.

Check the TapeAlert log for more specific drive error information. Refer to

Table 3

for recommended actions.

If the drive continues to request cleaning, contact

support.dell.com

.

3D

General Drive Error

Check the TapeAlert log for more specific drive error information. Refer to

Table 3

for recommended actions.

If the drive is logging Read/Write errors, repeat the operation with new

media.

If the drive fails with two different pieces of media, contact

support.dell.com

.

3E

Drive Load Error

Perform cleaning by loading a valid cleaning cartridge into the drive. If a

slot is available to be dedicated for a cleaning cartridge, this operation can

be enabled to run automatically within the Remote Management Unit

Configuration page.

Try to load a different piece of media.

If the operation fails with two different pieces of media, contact

support.dell.com

.

3F

Drive Unload Error

Drive/Media Error Types

40

Media Threading Error

Check the TapeAlert log for more specific drive error information. Refer to

Table 3

for recommended actions.

Verify that a valid cartridge type is in use.

Repeat operation with a new piece of media.

If the operation fails with two different pieces of media, contact

support.dell.com

.

41

Media Unthreading Error

42

Media (MAM) Info Error

43

Invalid Media Type

44

Expired Cleaning Media

45

Unknown Media Error

46

Drive/Media Error

Miscellaneous Error Types

Advertising