Dell Inspiron 640M - Manual (Page 112)

112
Adding and Replacing Parts
To replace the hard drive in the hard drive bay:
1 Follow the procedures in "Before You Begin" on page 109.
2 Turn the computer over, and loosen the two captive screws in the hard drive cover.
NOTICE:
When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting
Against Electrostatic Discharge" in the Product Information Guide.
3 Lift the cover off the computer and set it aside.
4 Use your finger to slide the hard drive toward the screw holes, and then use the pull-tab to lift the hard
drive straight up to remove it from the computer.
1 screws (2)
1