Battery, Removing a battery, Installing the battery – Dell Latitude X300 User Manual

Page 4

Advertising
background image

Back to Contents Page

 

Battery

Dell™ Latitude™ X300 Service Manual 

  

Removing a Battery

  

Installing the Battery

 

Removing a Battery

 

 

 

1.

 

Ensure that the computer is turned off, suspended in a power management mode, or connected to an electrical outlet.

2.

 

If the computer is connected to a media base (docked), undock it. See the documentation that came with your media base for instructions.

3.

 

Slide the battery latch releases on the bottom of the computer and remove the battery from the bay.

 

 

 

Installing the Battery

 

To install the battery, slide the battery or the optional extended battery into the bay until the latch release clicks.

 

CAUTION:

Before performing these procedures, disconnect the modem from the telephone wall jack.

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.

NOTICE:

If you choose to replace the battery with the computer in standby mode, you have up to 1 minute to complete the battery replacement. The

computer will shut down shortly after this.

1

 

battery latch release (2)

 

G0767

Advertising