Screw identification placemat – Dell Latitude X300 User Manual
Page 8
Advertising
Screw Identification Placemat
When you are removing and replacing components, photocopy the placemat as a tool to lay out and keep track of the screws. The placemat provides the
number of screws and their sizes.
NOTICE:
When reinstalling a screw, you must use a screw of the correct diameter and length. Ensure that the screw is properly aligned with its
corresponding hole, and avoid overtightening.
Keyboard:
(4 each)
Palm Rest:
(9 each)
Display Assembly:
(2 each)
Keyboard Tray:
(5 each)
Hard Drive:
(4 each)
System Board:
(3 each)
Modem Card:
Cooling Fan:
Advertising