System board, Removing the system board – Dell Latitude X300 User Manual
Page 40
Back to Contents Page
System Board
Dell™ Latitude™ X300 Service Manual
Removing the System Board
1.
Remove the
battery
.
2.
Remove the
keyboard
.
3.
Remove the
palm rest
.
4.
Remove the
hinge covers
.
5.
Remove the
display assembly
.
6.
Remove the
keyboard tray
.
7.
Remove the
hard drive
.
8.
Remove the
memory module
.
9.
Remove the
Mini PCI card
, if present.
10.
Remove the
modem card
, if present.
11.
Remove the three M2 x 4-mm screws that secure the system board to the bottom case.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read "
Before You Begin
" before performing the following procedure.
NOTE:
Each system board screw has an arrow beside it.