Using a dns server, Using a wins server – Dell POWERVAULT MD3620I User Manual

Page 48

Advertising
background image

48

Post Installation Tasks

2 Right-click the network connection you want to configure and select

Properties.

3 On the General tab (for a local area connection) or the Networking tab

(for all other connections), select

Internet Protocol (TCP/IP), and then

click

Properties.

4 Select Use the following IP address and enter the IP address, subnet mask,

and default gateway addresses.

Using A DNS server

1 In the Control Panel, select Network connections or Network and Sharing

Center and then click Manage network connections.

2 Right-click the network connection you want to configure and select

Properties.

3 On the General tab (for a local area connection) or the Networking tab

(for all other connections), select

Internet Protocol (TCP/IP), and then

click

Properties.

4 Select Obtain DNS server address automatically or enter the preferred

and alternate DNS server IP addresses and click

OK.

Using A WINS Server

NOTE:

If you are using a DHCP server to allocate WINS server IP addresses, you

do not need to add WINS server addresses.

1 In the Control Panel, select Network connections.
2 Right-click the network connection you want to configure and select

Properties.

3 On the General tab (for a local area connection) or the Networking tab

(for all other connections), select

Internet Protocol (TCP/IP), and then

click

Properties.

4 Select AdvancedWINS tab and click Add.
5 In the TCP/IP WINS server window, type the IP address of the WINS

server and click

Add.

6 To enable use of the Lmhosts file to resolve remote NetBIOS names, select

Enable LMHOSTS lookup.

book.book Page 48 Thursday, July 18, 2013 5:39 PM

Advertising
This manual is related to the following products: