Dell Dimension 3100C - Manual (Page 64)

64
Removing and Installing Parts
Installing Memory
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your
body before you touch any of your computer’s electronic components. You can do so by touching an unpainted
metal surface on the computer chassis.
1 Follow the procedures in "Before You Begin" on page 53.
2 Press out the securing clip at each end of the memory module connector.
1 memory connector closer to
processor 2 securing clips (2) 3 connector
2
3
1