Dell Dimension 3100C - Manual (Page 68)

68
Removing and Installing Parts
CAUTION:
Some network adapters automatically start the computer when they are connected to a network. To
guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any
cards.
6 Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.
7 Before you close the card retention door, ensure that:
• The tops of all cards and filler brackets are flush with the alignment bar.
• The notch in the top of the card or filler bracket fits around the alignment guide.
1 bracket within slot 3 alignment bar 5 fully seated card3
2 bracket caught outside of slot 4 alignment guide 6 not fully seated card4
5
6
2
1
4
3