Dell KVM 2161DS - Manual (Page 216)

200 Appendix C: MIBs and SNMP Traps
21 Configuration
file loaded in the
Remote Console
Switch.
Command
issued by user:
%s. Name of file
loaded: %s.
Informational The Remote Console Switch has loaded a
configuration file.
The name of the user who commanded the
Remote Console Switch to load the
configuration file is contained in
dsTrapObjectUserName.
The name of the file that was loaded is
contained in dsTrapObjectFileName.
22 User database
file loaded in the
Remote Console
Switch.
Command
issued by user:
%s. Name of file
loaded: %s.
Informational The Remote Console Switch has loaded a
user database file.
The name of the user who commanded the
Remote Console Switch to load the user
database file is contained in
dsTrapObjectUserName.
The name of the file that was loaded is
contained in dsTrapObjectFileName.
23 Invalid
connection
detected. Device
ID: %s.
Informational The Remote Console Switch has detected an
invalid connection.
This can include two SIP devices on a port
where one or more have a legacy KVM
Switch, or some other illegal setup condition.
Information about the nature of the failure is
stored in the
dsTrapObjectFirmwareCondition object.
NOTE: This trap is deprecated and is no longer
sent.
Trap
ID Trap Message Severity Description