Pdu inlets window – Dell KVM 2161DS User Manual
Page 77
Controlling Your System at the Analog Ports
61
1 Press <Print Screen>
to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - PDUs.
3 Complete one of the following steps:
Select a PDU name, then click
Settings to open the PDU Settings window.
-or-
Select a PDU name, then press <Enter> to open the
PDU Settings
window.
-or-
Double-click on the PDU name to open the
PDU Settings window.
4 Complete any of the following steps:
a
In the Name field, enter the PDU name.
b
In the Cycle Delay field, enter the number of seconds you want the
Remote Console Switch to wait between turning off and turning on.
5 Click OK.
PDU Inlets window
From the Inlets window, you can view and modify inlet parameters.
NOTE:
You can only modify inlet parameters on a PDU that is currently online.
To view/modify PDU Inlet settings:
1 Press <Print Screen>
to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - PDUs.
3 Complete one of the following steps:
Select a PDU name, then click
Settings to open the PDU Settings window.
-or-
Select a PDU name, then press <Enter> to open the
PDU Settings
window.
-or-
Double-click on the PDU name to open the
PDU Settings window.