Dell Dimension 3000 - Manual (Page 80)

80
Appendix
System Setup
Overview
Use system setup as follows:
• To change the system configuration information after you add, change, or remove any hardware in your
computer
• To set or change a user-selectable option such as the user password
• To read the current amount of memory or set the type of hard drive installed
Before you use system setup, it is recommended that you write down the system setup screen information
for future reference.
NOTICE:
Unless you are an expert computer user, do not change the settings for this program. Certain changes
can make your computer work incorrectly.
Environmental
Temperature:
Operating 10 ° to 30°C (50° to 86°F)
NOTE:
At 30°C (86°F), the maximum operating altitude is 914 m
(3000 ft).
Storage –40 ° to 65°C (–40° to 149°F)
Relative humidity 20% to 80% (noncondensing)
Maximum vibration:
Operating 0.25 G at 3 to 200 Hz at 0.5 octave/min
Storage 2.20 Grms at 10 to 500 Hz at 1 octave/min
Maximum shock:
Operating 105 G, 2 ms
Storage 32 G with a velocity change of 596.9 cm/sec (235 inches/sec)
Altitude:
Operating –15.2 to 3048 m (–50 to 10,000 ft)
NOTE:
At 30°C (95°F), the maximum operating altitude is 914 m
(3000 ft).
Storage –15.2 to 10,670 m (–50 to 35,000 ft)