3 show port module – Dell POWEREDGE M1000E User Manual
Page 19
Rev 1.00
19
mismatch - both uplink and downlink are connected, but there is a mismatch
10G - uplink and downlink are connected at 10GbE
• Downlink port link state:
- down: blade not present
- 10G: 10GbE link
• Detailed downlink port link states (available in ADMIN level only):
- 10G KR [AN]: 10GBASE-KR link;
AN indicates that 802.3ap autonegotiation is active
• Uplink port link state:
- empty: No module present
- module_type [no link]: Module is present (module type is shown);
no link: optical fiber cable is disconnected
Example:
# show port link
Port
Group
Connect
Downlink
Uplink
Status
--------------------------------------------------------------
1
A (10G)
10G
10G
SFP+ SR
Link Up
2
A (10G)
10G
10G
SFP+ SR
Link Up
3
A (10G)
10G
10G
SFP+ LR
Link Up
4
A (10G)
10G
10G
SFP+ SR
Link Up
5
A (10G)
10G
10G
SFP+ SR
Link Up
6
A (10G)
mismatch
10G
SFP SX
Link Down
7
A (10G)
down
down
SFP+ SR
Link Down
8
A (10G)
down
down
empty
9
B (10G)
mismatch
10G
SFP SX
Link Down
10
B (10G)
mismatch
10G
SFP SX
Link Down
11
B (10G)
mismatch
10G
SFP SX
Link Down
12
B (10G)
mismatch
10G
SFP LX
Link Down
13
B (10G)
down
down
empty
14
B (10G)
down
10G
SFP+ SR
Link Down
15
B (10G)
mismatch
1G
SFP+ SR
Link Down
16
B (10G)
mismatch
1G
SFP+ SR
Link Down
#
# show port link 7
Port
Group
Connection
Downlink
Uplink
Status
--------------------------------------------------------------
7
A (10G)
down
down
SFP+ SR
Link Down
#
3.7.3 show port module
Synopsys:
show port module port_number
Description:
Show the transceiver module information for the specified uplink port.