Dell PowerVault LTO3-080 User Manual
Page 27
Advertising
![background image](/manuals/620015/27/background.png)
1.
Air Intake Area
Step 2 — Removing Power from the System
1.
Power-off the system.
2.
Disconnect the power cord from both the electrical outlet and the system.
Step 3 — Preparing the Mounting Bay in Your System
Refer to your system's documentation for instructions on how to prepare the mounting bay to receive the tape drive.
CAUTION: To avoid personal injury or damage to the system or tape drive, ensure that the system power cord is disconnected before you
install the drive.
Advertising