Dell Inspiron 3700 - Manual (Page 100)

Back to Contents Page
Power Conservation: Dell™ Inspiron™ 3700 System Reference
Experimenting With Power Conservation
In general, the lower the value you set for each power conservation feature, the longer the battery's charge lasts. On the other hand, setting high
values tends to optimize the computer's performance.
To evaluate the way that different settings affect how long you can operate the computer on battery power versus the relative efficiency of how the
software performs, experiment as follows:
l Use the computer with all the options set at their default values.
l
Use the computer with all the options disabled or set to Off.
l Use the computer with all the options set to their minimum or maximum values.
Using Key Combinations
Table 1 identifies the power management key combinations.
Table 1. Key Combinations to Activate/Deactivate Features
* These key combinations may not function with the ACPI if the settings have not been activated with the Power Management Properties
window in the Control Panel.
Experimenting With Power Conservation Standby Mode
Using Key Combinations Power Management Properties for Microsoft Windows 98
Closing the Display Power Management Properties for Microsoft Windows NT
Suspend Mode Save-to-Disk Suspend Mode
NOTE: For Advanced Configuration and Power Interface (ACPI)-compliant systems, power management settings are
controlled from the Power Management Properties window in the Control Panel. In other systems, power management
settings are controlled from the System Setup program.
NOTE: To use key combinations on an external keyboard, enable the External Hot Key option in the System Setup
program, and press <Scroll Lock> instead of <Fn>.
Feature Activate/Deactivate
Turn off display To activate, press <Fn><d>.*
To deactivate, move the cursor or press a key on the integrated or external keyboard. (If nothing
happens, the computer may be in standby mode. Press the power button to resume normal
operation.)
Turn off hard-disk drive To activate, press <Fn><h>.*
Automatically deactivates when the hard-disk drive is accessed.
NOTE: If a modular hard-disk drive is installed in the media bay, you cannot turn off the hard-
disk drive by pressing <Fn><h>.
Standby mode
Sleep mode (ACPI-compliant systems)
Standby mode (Microsoft ® Windows® 98
systems)
To activate, press <Fn><Esc>.
To deactivate, press the power button.
S2D To activate, press <Fn><a>. (On a French keyboard, press <Fn><q>.)*
To deactivate, press the power button.