Dell Inspiron 3700 - Manual (Page 85)

asset /o ABC Company
4. When the system prompts you to verify the owner tag, type y and press <Enter>.
The system displays the new owner tag.
Deleting an Owner Tag
To delete the owner tag without assigning a new one, perform the following steps:
1. Click the Start button, point to Programs, and click MS-DOS Prompt.
2. Type CD c:\Dell\Util and press <Enter>.
3. Type asset /o /d and press <Enter>.
Table 1 lists the command-line options you can use with the Asset Tag utility. To use one of these options, open an MS-DOS ® prompt, type
asset and a space followed by the option, and then press <Enter>.
Table 1. Asset Tag Utility Command-Line Options
Back to Contents Page
NOTE: For security, you cannot set, change, or delete the owner tag if the primary or administrator password is set.
Asset Tag Option Description
/d Deletes the asset tag number
/o <tag> Specifies a new owner tag
/o /d Deletes the owner tag
/? Displays the Asset Tag utility help screen