Dell Dimension 5150/E510 - Manual (Page 21)

Setting Up and Using Your Computer
21
To use the Media Card Reader:
1 Check the media or card to determine the proper orientation for insertion.
2 Slide the media or card into the appropriate slot until it is completely seated in the connector.
If you encounter resistance, do not force the media or card. Check the card orientation and try again.
Connecting Two Monitors
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
If you are connecting two monitors that have VGA connectors, you must have the optional DVI adapter.
If you are connecting two flat-panel monitors, at least one of them must have a VGA connector. If you are
connecting a TV, you may connect only one monitor (VGA or DVI) in addition to the TV.
If you purchased a graphics card that supports dual monitors, follow these instructions to connect and
enable your monitors. The instructions tell you how to connect either two monitors (each with a VGA
connector), one monitor with a VGA connector and one monitor with a DVI connector, or a TV.
xD-Picture Card
and SmartMedia (SMC)
Memory Stick (MS/MS Pro)
SecureDigital Card (SD)/
MultiMediaCard (MMC)
CompactFlash Type I
and II (CF I/II) and
MicroDrive Card
WD846bk2.book Page 21 Thursday, September 14, 2006 2:40 PM