Dell Dimension 5150/E510 - Manual (Page 30)

30
Setting Up and Using Your Computer
Setting Your Computer to RAID-Enabled Mode
1 Enter system setup (see "System Setup" on page 107).
2 Press the up- and down-arrow keys to highlight Drives, and press <Enter>.
3 Press the up- and down-arrow keys to highlight SATA Operation, and press <Enter>.
4 Press the left- and right-arrow keys to highlight RAID On, press <Enter>, and then press <Esc>.
NOTE:
For more information about RAID options, see "System Setup Options" on page 109.
5 Press the left- and right-arrow keys to highlight Save/Exit, and press <Enter> to exit system setup and
resume the boot process.
WD846bk2.book Page 30 Thursday, September 14, 2006 2:40 PM