Dell Dimension 5150/E510 - Manual (Page 70)

70
Removing and Installing Parts
3 Press out the securing clip at each end of the memory module connector.
4 Align the notch on the bottom of the module with the crossbar in the connector.
NOTICE:
To avoid damage to the memory module, press the module straight down into the connector while you
apply equal force to each end of the module.
securing clips (2)
connector
memory connector closest to processor
notch
memory module
cutouts (2)
crossbar
WD846bk2.book Page 70 Thursday, September 14, 2006 2:40 PM