Dell UP2414Q Monitor - Manual (Page 17)

About Your Monitor

17
NOTE: USB 3.0 functionality requires a USB 3.0 compatible computer and
devices.
NOTE: For computers running Windows
® 7 must have Service Pack 1 (SP1)
installed. The monitor’s USB interface works only when the monitor is On or in
Power Save Mode. If you turn Off the monitor and then turn it On, the attached
peripherals may take a few seconds to resume normal functionality.
Card Reader Specifications
Overview
• The Flash Memory Card Reader is a USB storage device that allows users
to read and write information from and into the memory card.
• The Flash Memory Card Reader is automatically recognized by Microsoft ®
Windows ® Vista, Windows ® 7 Service Pack 1 (SP1) and Windows ® 8/Win-
dows ® 8.1.
• Once installed and recognized, memory card (slot) appears drive letter.
• All standard file operations (copy, delete, drag-and-drop, etc.) can be
performed with this drive.
NOTE: Install the Card Reader driver (provided in the Drivers and
Documentation Media CD that comes with the monitor) to ensure memory
cards are detected properly when inserted into the card slot.
Features
The Flash Memory Card Reader has the following features:
•
Supports Microsoft ® Windows ® Vista, Windows ® 7 Service Pack 1 (SP1)
and Windows ® 8/Windows ® 8.1 operating systems.
• Mass Storage Class device (No drivers are required under Microsoft ®
Windows ® Vista, Windows ® 7 Service Pack 1 (SP1) and Windows ® 8/Win-
dows ® 8.1).
• Supports various memory card media.