Dell UP2414Q Monitor - Manual (Page 43)

Operating the Monitor

43
This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See
Monitor Specifications for the Horizontal
and Vertical frequency ranges addressable by this monitor. Recommended
mode is 3840 x 2160.
You will see the following message before the DDC/CI function is disabled.
Dell UP2414Q
The function of adjusting display setting using PC application
will be disabled.
Do you wish to disable DDC/CI function?
No
Yes
When monitor enters Power Save Mode, the following message appears:
Dell UP2414Q
Entering Power Save Mode.
Activate the computer and wake up the monitor to gain access to the OSD .
If you press any button other than the power button, one of the following
messages will appear depending on the selected input:
Dell UP2414Q
There is no signal coming from your computer.
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button now to select the correct
input source on the On-Screen-Display menu.
If either HDMI, DP or m-DP input is selected and the corresponding cable is
not connected, a floating dialog box as shown below appears.
Dell UP2414Q
No DisplayPort Cable
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors