Setting the dp 1.2 display, Setting the dp1.2 display, Setting up the dp1.2 display – Dell UP2414Q Monitor User Manual

Page 45: Operating the monitor

Advertising
background image

Operating the Monitor

45

Setting Up the DP1.2 Display

The default out of factory setting in the UP2414Q is DP1.1a.
To enable 3840 x 2160 at 60 Hz, ensure the graphics card of the DP source is
DP1.2 certified with MST feature, capable of supporting resolution up to 3840
x 2160 at 60 Hz, and its driver supports DisplayID v1.3, then change the DP
setting to DP1.2 by performing the below steps:
A) Monitor is able to show content
1. Use OSD button to navigate to Display Settings.

Dell UP2414Q

Brightness/Contrast

Input Source

Resolution: 3840x2160, 30Hz

Color Settings

Aspect Ratio

16:9

50

Dynamic Contrast

Uniformity Compensation

DisplayPort 1.2

Display Info

Reset Display Settings

Display Settings

PBP Settings

Energy Settings

Menu Settings

Other Settings

Personalize

Energy Use

Sharpness

Noise Reduction

Off

2. Go to DisplayPort 1.2 selection.
3. Select Enable or Disable accordingly.
4. Follow the screen message to confirm selection of DP1.2 or DP1.1a.

Please ensure your Graphics Card can support DP MST (Daisy chain)/HBR2 (High

Bit Rate) before changing the monitor setting to DP1.2.

Incorrect setting may result in blank screen on monitor.

Dell UP2414Q

Confirm

Exit

DP MST/HBR2 will be disabled for DP1.1a.

Dell UP2414Q

Confirm

Exit

Advertising