Replacing the status light board – Dell Inspiron 17R (N7110, Early 2011) User Manual
Page 58
Advertising
58
Status Light Board
Replacing the Status Light Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Place the status-light board on the computer base.
3 Slide the status-light-board cable into the connector on the system board
and press down on the connector latch to secure the status-light-board
cable to the connector on the system board.
4 Replace the screw that secures the status light board to the computer base.
1
screw
2
system board connector
3
status light board
1
2
3
book.book Page 58 Friday, April 13, 2012 2:02 PM
Advertising