Replacing the thermal cooling assembly, Ly (see "replacing the thermal – Dell Inspiron 17R (N7110, Early 2011) User Manual
Page 82
Advertising
82
Thermal Cooling Assembly
Replacing the Thermal Cooling Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Place the thermal cooling assembly on the system board.
3 Align the six captive screws on the thermal cooling assembly with the
screw holes on the system board and tighten the screws in sequential order
(indicated on the thermal cooling assembly).
4 Follow the instructions from step 5 to step 18 in "Replacing the System
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1
captive screws (6)
2
thermal cooling assembly
1
2
book.book Page 82 Friday, April 13, 2012 2:02 PM
Advertising