Replacing the display cable – Dell Inspiron 17R (N7110, Early 2011) User Manual
Page 96
Advertising
96
Display
Replacing the Display Cable
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the display cable to the display-board connector and secure it
with the tape.
3 Turn the display panel over and place it on the display back cover.
4 Replace the display panel (see "Replacing the Display Panel" on page 94).
5 Replace the display bezel (see "Replacing the Display Bezel" on page 93).
6 Replace the display assembly (see "Replacing the Display Assembly" on
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1
display-cable connector
2
tape
1
2
book.book Page 96 Friday, April 13, 2012 2:02 PM
Advertising