19 turn on the computer, Entering the service tag in the bios, 2 turn on the computer – Dell Inspiron 17R (N7110, Early 2011) User Manual

Page 73

Advertising
background image

System Board

73

15 Replace the memory module (see "Replacing the Memory Module(s)" on

page 24).

16 Follow the instructions from step 4 to step 5 in "Replacing the Optical

Drive" on page 19.

17 Replace the battery (see "Replacing the Battery" on page 16).
18 Replace any blank or card you removed from the Media Card Reader.

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

19 Turn on the computer.

NOTE:

After you have replaced the system board, enter the computer Service Tag

into the BIOS of the replacement system board.

20 Enter the service tag (see "Entering the Service Tag in the BIOS" on

page 73).

Entering the Service Tag in the BIOS

1 Ensure that the AC adapter is plugged in and that the main battery is

installed properly.

2 Turn on the computer.
3 Press <F2> during POST to enter the system setup program.
4 Navigate to the security tab and enter the service tag in the Set Service

Tag field.

book.book Page 73 Friday, April 13, 2012 2:02 PM

Advertising