Dell POWEREDGE M1000E - Manual (Page 23)

Access Gateway Administrator’s Guide 3
53-1001760-01
Fabric OS features in Access Gateway mode
1
Fabric OS features in Access Gateway mode
Table 1 lists Fabric OS components that are supported on a switch when AG mode is enabled. “No”
indicates that the feature is not provided in AG mode. “NA” indicates this feature is not applicable
in Access Gateway mode of operation. A single asterisk (*) indicates the feature is transparent to
AG, that is AG forwards the request to the Enterprise fabric. Two asterisks (**) indicates that if the
Enterprise fabric is not a Brocade fabric, the feature may not be available.
TABLE 1 Fabric OS components supported on Access Gateway
Feature Support
Access Control Yes (limited roles) 1
Adaptive Networking Yes
Admin Domains No
Audit Yes
Beaconing Yes
Config Download/Upload Yes
DHCP Yes
Environmental Monitor Yes
Error Event Management Yes
Extended Fabrics No
Fabric Device Management Interface (FDMI) Yes*
Fabric Manager Yes**
Fabric Watch Yes (limited)
FICON (includes CUP) No
High Availability Hot Code Load
Native Interoperability Mode NA
License Yes**
Log Tracking Yes
Management Server NA
Manufacturing Diagnostics Yes
N_Port ID Virtualization Yes
Name Server NA
Network Time Protocol (NTP) No (no relevance from fabric perspective) 2
Open E_Port NA
Performance Monitor Yes (Basic PM only, no APM support)
Persistent ALPA Yes
Port Mirroring No
QuickLoop, QuickLoop Fabric Assist No
Security Yes (ADS/DCC Policy)
SNMP Yes