Dell 964 All In One Photo Printer - Manual (Page 27)

About Your Printer 2 7
75 sheets of
photo, coated,
or glossy paper • The glossy or coated side of the paper faces down.
• The paper is centered in the paper support.
• You select Normal or Photo print quality.
• The paper guides rest against the right and left edges of the paper.
• The paper guide rests against the bottom edge of the paper.
25 iron-on
transfers • You follow the loading instructions on the iron-on transfer packaging.
• The print side of the transfer faces down.
• The paper guides rest against the right and left edges of the paper.
• The paper guide rests against the bottom edge of the paper.
• The transfers are centered in the paper support.
• You select Normal or Photo print quality.
75
transparencies • The rough side of the transparencies faces down.
• The paper guides rest against the right and left edges of the transparencies.
• The paper guide rests against the bottom edge of the paper.
NOTE: You can load a single transparency into the paper support without
removing plain paper.
• You select Normal or Photo print quality.
• The transparencies are centered in the paper support.
35 sheets of
labels • The print side of the labels faces down into the paper support.
• The top of the labels feeds into the printer first.
• The paper guides rest against the right and left edges of the paper.
• The paper guide rests against the bottom edge of the paper.
100 sheets of
custom size
paper • The print side of the paper faces down.
• Your paper fits within these dimensions:
Width
• 76–216 mm
• 3.0–8.5 inches
Length
• 127–432 mm
• 5.0–17.0 inches
• The paper is centered in the paper support.
• The paper guides rest against the right and left edges of the paper.
• The paper guide rests against the bottom edge of the paper.
100 sheets of
letterhead
paper • The front of the letterhead faces down.
• The top of the letterhead feeds into the printer first.
• The paper guides rest against the right and left edges of the paper.
• The paper guide rests against the bottom edge of the paper.
Load up to: Make sure: