Dell Studio XPS 8100 (Late 2009) - Manual (Page 30)

Replacing the Front USB Panel
1. Follow the procedures in Before You Begin .
2. Align and slide the front USB panel clamp into the front USB panel clamp slot.
3. Replace the screw that secures the front USB panel to the front panel.
4. Connect the front USB panel cables to the system board connectors (see System Board Components ).
5. Replace the front bezel (see Replacing the Front Bezel ).
6. Replace the computer cover (see Replacing the Computer Cover ).
7. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION: Take care not to damage the cable connectors and the cable routing clips when sliding the front USB panel into the front USB panel
clamp slot.