Dell Studio XPS 8100 (Late 2009) User Manual
Page 46
Advertising
4.
Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2.
5.
Wait for approximately five seconds to clear the CMOS setting.
6.
Remove the 2-pin jumper plug from pins 1 and 2 and replace it on pins 2 and 3.
7.
Replace the computer cover (see
Removing the Computer Cover
).
8.
Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
Advertising