Dell Studio XPS 8100 (Late 2009) User Manual
Page 37
Advertising
3.
Replace the four screws that secure the power supply to the chassis.
4.
Connect the DC power cables to the system board and drives (see
System Board Components
).
5.
Replace the computer cover (see
Replacing the Computer Cover
).
6.
Check the voltage selector switch (if applicable) to ensure that the correct voltage is selected.
7.
Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
WARNING:
Failure to replace and tighten all screws may cause electrical shock as these screws are a key part of the system grounding.
Advertising