Dell Studio XPS 8100 (Late 2009) User Manual
Page 39
Advertising
1.
Follow the procedures in
Before You Begin
.
2.
Align and push the power button module tabs into the slots in the top panel.
3.
Connect the power button module cable to the system board connector FP1 (see
System Board Components
).
4.
Replace the top cover (see
Replacing the Top Cover
).
5.
Replace the optical drive (see
Replacing the Optical Drive
).
6.
Replace the front bezel (see
Replacing the Front Bezel
).
7.
Replace the computer cover (see
Replacing the Computer Cover
).
8.
Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
Advertising