Dell PowerEdge 1600SC - Manual (Page 3)

Table A-1. System Board Jumper Settings
System Board Connectors
See Figure A -3 and Table A -2 for the location and description of system board connectors. Figure A -3 also indicates expansion slots and bus operating speeds.
Figure A-3. System Board Connectors
Jumper Setting Description
J11 pins 1 and
2
(default)
The password feature is enabled.
The password feature is disabled.
J11 pins 3 and
4 (default)
The configuration settings in NVRAM are retained at system boot.
The configuration settings in NVRAM are cleared at next system boot (see " Resetting Corrupted BIOS Configuration " in
"Troubleshooting Your System").
jumpered unjumpered