Dell PowerEdge 1600SC - Manual (Page 33)

Diagnostics Messages
When you run a test group or subtest in the system diagnostics, an error message may result. Diagnostic error messages are not covered in this section.
Record the message on a copy of the Diagnostics Checklist (see "
Getting Help "), and then follow the instructions in that section for obtaining technical
assistance.
Alert Messages
Systems management software generates alert messages for your system. For example, the software generates messages that appear in the SNMP trap log
file. Alert messages consist of information, status, warning, and failure messages for drive, temperature, fan, and power conditions. For more information, see
the systems management software documentation.
Back to Contents Page