Dell PRECISION 530 - Manual (Page 124)

124
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
Re m o v i n g t h e S y s t e m B o a r d
10 Press down on the two gray metal chassis tabs, lift the two green TEM
pan release tabs, and slide the TEM pan toward the front of the
computer.
The TEM pan and system board are removed as one unit.
11 Reach under the TEM pan near the release tabs, and carefully lift the
TEM pan out of the chassis at an angle.
Replacing the System Board
The TEM pan and system board are replaced as one unit.
NOTICE: Do not twist the TEM pan or system board as you position it in the
chassis.
1 Lower the TEM pan into the chassis at an angle, with the I/O panel
connectors lowered into the chassis first.
green TEM pan
release tabs (2)
system board
back panel
I/O panel
connectors
TEM pan screw
gray metal tabs (2)