Removing the power supply, Replacing the power supply, 4 install the cable retainer – Dell PRECISION 530 User Manual
Page 43
Advertising
43
6
While pressing the power supply release button, slide the power supply
toward the back of the computer.
7
Lift the power supply away from the chassis (see the following figure).
8
Slide the power supply cables out of the chassis through the hole.
Re m o v i n g t h e P o w e r S u p p l y
Replacing the Power Supply
1
Slide the power supply cables through the hole into the chassis.
2
Insert the power supply securing tab into the power supply securing
slot on the chassis. Ensure that all five securing tabs are connected to
their slots on the chassis.
3
Slide the power supply toward the front of the computer. See
4
Install the cable retainer.
power supply
power supply
securing tabs (5)
power supply release button
Advertising