Dell PowerEdge C5125 - Manual (Page 40)

40
PEF
The PEF page allows you to configure the platform event filters. The
Platform Event Filters List displays the actions that will execute when an
event occurs. An event occurs when the status of a system element is outside
a set limit. You can select a PEF and press the Modify button to configure it.
Or you can press Delete to remove it.
Table 1-26. PEF
Item Description
PEF # The PEF configuration entry number. There are 40 PEF
configuration entries in the system.
Event Filter Action Specifies the corresponding action for a PEF triggered
event.
Sensor Type Displays the sensor type.
Sensor Num Displays the sensor number.
Event Trigger Shows the threshold type to cause the event occurs.