Dell XPS 15 (9530, Late 2013) - Manual (Page 10)

10 | Removing the Base-Cover Assembly
Removing the Base-Cover Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Close the display, and turn the computer over.
2 Turn the system badge over and place it on the base-cover assembly.
1 system badge 2 base-cover assembly
1 2